Send Message
Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsWire Connector Terminals

1A AC/DC PCB Connector Phosphor Bronze Contact, Gold-flash Crimp Terminals

1A AC/DC PCB Connector Phosphor Bronze Contact, Gold-flash Crimp Terminals

    • 1A AC/DC PCB Connector Phosphor Bronze Contact, Gold-flash Crimp Terminals
    • 1A AC/DC PCB Connector Phosphor Bronze Contact, Gold-flash Crimp Terminals
    • 1A AC/DC PCB Connector Phosphor Bronze Contact, Gold-flash Crimp Terminals
  • 1A AC/DC PCB Connector Phosphor Bronze Contact, Gold-flash Crimp Terminals

    Product Details:

    Place of Origin: Dongguan, China(mainland)
    Brand Name: HRT
    Certification: ISO9001/ ISO14001/UL/RoHS/REACH
    Model Number: A1003T

    Payment & Shipping Terms:

    Minimum Order Quantity: 5000pcs
    Price: USD0.0035per pcs
    Packaging Details: paper tray with out carton
    Delivery Time: 5 to 8 working days after payment checked
    Payment Terms: TT, Western Union, PayPal, L/C
    Supply Ability: 28000K pcs per month
    Contact Now
    Detailed Product Description
    Category: Terminal Pitch: 1.00mm
    Finish: Gold-flash Material: Phosphor Bronze
    Processing Method: E-Stamping Before Gold-flash Wire Range: AWG28# To 32#
    High Light:

    Crimp Terminal Connector

    ,

    Connector Crimp Terminal

    1, The specification of the product including basic size information, electrical and mechanical properties.

     

      Basic size information
    Color yellow
    Suitable housing A1003H-NP
    Part No. A1003-T
    Package 15K pcs/reel
    Insulation O.D. 0.80mm(Max)
       
     
                                                              Electrical properties
    Current Rating 1A AC, DC
    Voltage Rating 50V AC, DC
    Contact Resistance 30mΩ Max
    Insulation Resistance 100mΩ 
    Withstanding Voltage 500V AC/minute
     
                                                              Mechanical properties
    Temperature range -25℃ to 85 ℃
                                                Other data is in following report picture

     

     

    2, Related engineering drawing and testing report

     

    Attached picture is the engineering drawing and report of A1003T terminals, it will be convenient for you to confirm the product, please kindly review it. Thanks!!!

    1A AC/DC PCB Connector Phosphor Bronze Contact, Gold-flash Crimp Terminals

     

    1. Scope

    This specification covers the requirements for product performance of 1.00mm pitch wire to board

    connectors series.

     

     

    2. Construction,Dimensions,Material & Plating

    See the attached drawings

     

     

    3. Ratings & Applicable Wires

     

    Item Standard
    Rated Voltage (Max.) 50V AC/DC Insulation O.D. 0.80mm (Max.)
    Rated Current (Max.) And Applicable Wires AWG#28 1A AC/DC
    AWG#30 1A AC/DC
    AWG#32 0.8A AC/DC
    Ambient Temperature Range -25℃ ~ +85℃*

    *: Including terminal temperature rise

     

     

    4. Electrical Performance

     

    Test Description Procedure Requirement
    4-1

     

    Contact Resistance

     

    Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4) 20mΩ (Max.)
    4-2 Insulation Resistance Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B) 100MΩ (Min.)
    4-3 Dielectric Withstanding Voltage Mate connectors, apply 250V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301) No Breakdown.
    4-4 Contact Resistance on Crimped Portion Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA. 5mΩ (Max.)

     

    5. Mechanical Performance

     

    Test Description Procedure Requirement
    5-1 Actuator Insertion & Withdrawal Force Insert and withdraw connectors at the speed rate of 25±3mm / minute. Refer to paragraph 7
    5-2 Crimping Pull Out Force Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) AWG#28 1.0kgf (Min)
    AWG#30 0.5kgf (Min)
    AWG#32 0.3kgf (Min)
    5-3 Terminal Insertion Force. Insert the crimped terminal into the housing. 0.50kgf (Max.)
    5-4 Terminal/Housing Retention Force. Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. 0.50kgf (Min.)
    5-5 Pin Retention Force Apply axial push force at the speed rate of 25±3mm / minute 0.30kgf (Min.)
    5-6 Durability When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. Contact Resistance 40mΩ (Max.)
    5-7 Vibration

    Amplitude: 1.5mm P-P

    Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes.

    (Based upon MIL-STD-202 Method 201A)

    Appearance No Damage.

    Contact Resistance 40mΩ (Max.)

    Discontinuity 1 μsec.(Max.)

    5-8 Physical Shock 490m/s²{50G},3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)

     

     

    6. Environmental Performance And Others

     

    Test Description Procedure Requirement
    6-1 Temperature Rise Carrying rated current load.(Based upon UL 498) 30℃(Max.)
    6-2 Heat Resistance 85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)

    Appearance No Damage.

    Contact Resistance 40mΩ (Max.)

    6-3 Cold Resistance -25±3℃,96 hours (Based upon JIS C0020)
    6-4 Humidity

    Temperature: 40±2℃

    Relative Humidity : 90~95%

    Duration: 96 hours

    (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)

    Appearance No Damage.

    Contact Resistance 40mΩ (Max.)

    Insulation Resistance 10MΩ (Min.)

    Dielectric Withstanding Voltage Must meet 4-3

    6-5 Temperature Cycling

    5 cycles of:

    a) -55℃ 30 minutes

    b) +85℃ 30 minutes

    (Based upon JIS C0025)

    Appearance No Damage.

    Contact Resistance 40mΩ (Max.)

    6-6 Salt Spray Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101C Cond. B)
    6-7 SO2 Gas

    24 hours exposure to 50±5ppm.

    SO2 gas at 40±2℃.

    6-8 NH3 Gas 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.

     

    6-9 Solderability

    Soldering Time: 5±0.5 sec.

    Solder Temperature: 245±5℃

    Solder Wetting 95% of immersed area must show no voids, pin holes
    6-10 Resistance to Soldering Heat

    When reflowing

    Refer to paragraph 8

    Solder iron method

    Soldering Time: 5±0.5 sec.

    Solder Temperature: 370℃ ~ 400℃

    Appearance No Damage.

     

    7. Actuator Insertion/Withdrawal Force

    [Unit : kgf]

    Circuits At Initial
    Insertion (Max.) Withdrawal (Min.)
    Single 0.20 0.03
    2X08 3.40 0.49
    2X10 4.00 0.55
    2X15 5.50 0.70
    2X16 5.80 0.73
    2X20 7.00 0.85
    2X25 8.50 1.00

     


    3, Our main customer and partner

    This product is widely used in household appliance, computer, communication device. Because we can controll defective rate under a very low value, so our parts are accepted by famouse and international company like TPV, LeTV, Emerson, Amphenol Corporation, Skyworth, LuXshare, BYD etc. And the all products are certificated by REACH, UL, RoHS. In order to protect the evironment, some parts are halogen free. The below picture will help you to know this directly, thanks!

     

       

    Contact Details
    RULETEAM CONNECTION TECHNOLOGY (SHENZHEN) CO.,LTD

    Contact Person: Tienne Chen

    Tel: +8613711905178

    Send your inquiry directly to us (0 / 3000)

    Other Products