Pitch 2.00mm Wire Connector Terminals Tin - Plated 3A AC / DC Phoshor Bronze

Product Details:

Place of Origin:	China
Brand Name:	HRT
Certification:	ISO9001/ ISO14001/UL/RoHS/REACH
Model Number:	A2005

Payment & Shipping Terms:

Minimum Order Quantity:	5000 PCS
Price:	Negotiated
Packaging Details:	paper tray with out carton
Delivery Time:	5 to 8 working days after payment checked
Payment Terms:	TT, Western Union, PayPal, L/C
Supply Ability:	1000 pcs per day

Contact Now

Detailed Product Description

Product Name:	A2005-T Terminal	Pitch:	2.00mm
Wire Range:	AWG#22-#28	Material:	Phoshpor Bronze
Insulation O.D,:	1.45mm(Max)	Fire-protection Rating:	UL 94V-0
Finish:	Tin-plated	Used In:	A2005 Series Housing
High Light:	Crimp Terminal Connector , Connector Crimp Terminal

Pitch 2.00mm wire to board connectors phosphor bronze TIn-plated

Description:

1. Terminals are stamped by Brass, E-Stamping before Tin-plated ,Tin-plated we calling C2005-TPe, Minimum packing quantity is 4,000pcs/Reel. The daily production capacity is 200 to 300 KPCS.

2. Terminals' wire range :AWG #22--#28 and AWG#14#20,insulation OD is1.45mm(Max) .

Ordering Information& specificatons

part No .	Wire range	Insulation O.D,	Material	FInish	qty/reel
A2005-TPE	AWG#22-#28	1.45mm(Max)	phoshor bronze	Tin -plated	10,000Pcs

Testing Report

Please kindly check the attached files.

1. Scope

This specification covers the requirements for product performance of 2.00mm pitch wire to board

connectors series.

2. Construction,Dimensions,Material & Plating

See the attached drawings

3. Ratings & Applicable Wires

Item	Standard
Rated Voltage (Max.)	250V AC/DC		Insulation O.D. 1.45mm (Max.)
Rated Current (Max.) And Applicable Wires	AWG#22	3.0A AC/DC
	AWG#24	2.0A AC/DC
	AWG#26	1.5A AC/DC
	AWG#28	1.0A AC/DC
Ambient Temperature Range	-25℃ ~ +85℃*

*: Including terminal temperature rise

4. Electrical Performance

Test Description		Procedure	Requirement
4-1	Contact Resistance	Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4)	30mΩ (Max.)
4-2	Insulation Resistance	Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B)	1000MΩ (Min.)
4-3	Dielectric Withstanding Voltage	Mate connectors, apply 650V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301)	No Breakdown.
4-4	Contact Resistance on Crimped Portion	Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA.	5mΩ (Max.)

5. Mechanical Performance

Test Description		Procedure	Requirement
5-1	Actuator Insertion & Withdrawal Force	Insert and withdraw connectors at the speed rate of 25±3mm / minute.	Refer to paragraph 7-2
5-2	Crimping Pull Out Force	Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8)	AWG#22	5.0kgf (Min)
			AWG#24	3.0kgf (Min)
			AWG#26	2.0kgf (Min)
			AWG#28	1.0kgf (Min)
5-3	Terminal Insertion Force.	Insert the crimped terminal into the housing.	1.50kgf (Max.)
5-4	Terminal/Housing Retention Force.	Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing.	1.50kgf (Min.)
5-5	Pin Retention Force	Apply axial push force at the speed rate of 25±3mm / minute	1.00kgf (Min.)
5-7	Durability	When mated up to 30 cycles repeatedly by the rate of 10 cycle per minute.	Contact Resistance 40mΩ (Max.)
5-8	Vibration	Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A)	Appearance No Damage. Contact Resistance 40mΩ (Max.) Discontinuity 1 μsec.(Max.)
5-9	Physical Shock	490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)

6. Environmental Performance And Others

Test Description		Procedure	Requirement
6-1	Temperature Rise	Carrying rated current load.(Based upon UL 498)	30℃(Max.)
6-2	Heat Resistance	85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)	Appearance No Damage. Contact Resistance 40mΩ (Max.)
6-3	Cold Resistance	-25±3℃,96 hours (Based upon JIS C0020)	Appearance No Damage. Contact Resistance 40mΩ (Max.)
6-4	Humidity	Temperature: 40±2℃ Relative Humidity : 90~95% Duration: 96 hours (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)	Appearance No Damage. Contact Resistance 40mΩ (Max.) Insulation Resistance 100MΩ (Min.) Dielectric Withstanding Voltage Must meet 4-3
6-5	Temperature Cycling	5 cycles of: a) -55℃ 30 minutes b) +85℃ 30 minutes (Based upon JIS C0025)	Appearance No Damage. Contact Resistance 40mΩ (Max.)
6-6	Salt Spray	Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101D Cond. B)
6-7	SO2 Gas	24 hours exposure to 50±5ppm. SO2 gas at 40±2℃.
6-8	NH3 Gas	40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.
6-9	Solderability	Soldering Time: 5±0.5 sec. Solder Temperature: 245±5℃	Solder Wetting 95% of immersed area must show no voids, pin holes

6-10

Resistance to Soldering Heat

(DIP)

Solder pot method

Soldering time: 10±0.5 sec.

Solder Temperature: 260±5℃

Solder iron method

Soldering Time: 5±0.5 sec.

Solder Temperature: 370℃ ~ 400℃

Appearance No Damage.

6-11

Resistance to Soldering Heat (SMT)

When reflowing

Refer to paragraph 8

Solder iron method

Soldering Time: 5±0.5 sec.

Solder Temperature: 370℃ ~ 400℃

Appearance No Damage.

7. Crimp Specifications & Actuator Insertion/Withdrawal Force

[Unit : kgf]

Circuits	At Initial		Circuits	At Initial
Circuits	Insertion (Max.)	Withdrawal (Min.)	Circuits	Insertion (Max.)	Withdrawal (Min.)
02	1.50	0.30	09	6.00	1.40
03	2.50	0.60	10	6.50	1.60
04	3.50	0.80	11	7.00	1.60
05	4.00	1.00	12	7.50	1.80
06	4.50	1.20	13	8.00	2.00
07	5.00	1.20	14	9.00	2.00
08	5.50	1.40	15	10.00	2.50

Quality:

The world's xinpei Plastic& metal electronic Co.,Ltd.to provide customers with high efficiency service responsibility, forge ahead, the endess pursuit

Except the plating ,From Design tooling, stamping ,Injection molding, assemble, Testing ,packing .All the
step are doing by ourself. So we can control the quality.

1. Manufactured under strict controls.

2. ISO 9001:2008

3. UL Certification

4. Reach Cetitifaction

5. RoHS compliance

6. OEM for PULSE

7. Active Environmental policy

8. Every module tested 3times (not just batch tested)

Pitch 2.00mm Wire Connector Terminals Tin - Plated 3A AC / DC Phoshor Bronze

Service:

Our company for the purpose of "arduous pioneering, pure devotees of" "scientific management ,quality first ,service ,reputation first" ,and continuously improve product quality and perfect service , high-efficiency business management ,to provide customer with quality products and satisfactory service .

HRT Offer good pre-sales & after-sales service &Strong technical support

1. New Project: Strong technical and ideal support your new design

2. Existing projects: Try to help customer to save the cost to offer the good quality product and save

3. time.

4. Free Samples:10~20 PCS of each part number

5. Shipping Fee :We can get 80% off from DHL/UPS/TNT/FedEx, keeping safe and fast.

6. Customer complaint:24-48 hours reply 8D report

7. Warranty : 24 months ( Merchandise are promised to be promptly returned, replacement, or repair

8. kits if customers are not satisfied)

Tag:

Contact Person: Tienne Chen

Tel: +8613711905178