Place of Origin: | Dongguan, China(mainland) |
Brand Name: | HRT |
Certification: | ISO9001/ ISO14001/UL/RoHS/REACH |
Model Number: | A1252H-NP |
Minimum Order Quantity: | 5000pcs |
---|---|
Price: | USD0.005 to 0.5 per pcs |
Packaging Details: | bags and carton or customized term |
Delivery Time: | 5 to 8 working days after payment checked |
Payment Terms: | TT, Western Union, PayPal, L/C |
Supply Ability: | 28000K pcs per month |
Category: | LVDS Display Connector | Mated Wafer: | A1252 Single Series |
---|---|---|---|
Max Positions: | 15 Pins | Material: | Nylon66,UL94V-0 |
Secure Lock Structure: | Without | Wire Range: | AWG#26 To #30 |
High Light: | Crimp Style Connector,Wire To Board Power Connector,Lvds Display Connector 1.25mm |
1, Detailed form of product specification
Basic size information | |||
Color | Grey | ||
Pitch | 1.25mm | ||
Row | Single | ||
Wire Insulation O.D. | 1.0mm(Max) | ||
Terminal Materials | Phosphor | ||
Finish terminals | Tin-plated or gold-flash | ||
Electrical properties | |||
Current Rating | 1A AC, DC | ||
Voltage Rating | 150V AC, DC | ||
Contact Resistance | 30mΩ Max | ||
Insulation Resistance | 500mΩ | ||
Withstanding Voltage | 500V AC/minute | ||
Mechanical properties | |||
Temperature range | -25℃ to +85 ℃ |
More characteristic of this part, please kindly check the following pictures. Wish you can get the right parts from our company. Thanks a lot!!!
2, Related drawing and report
5. Mechanical Performance
Test Description | Procedure | Requirement | ||
5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw connectors at the speed rate of 25±3mm / minute. | Refer to paragraph 7 | |
5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#26 | 2.0kgf (Min) |
AWG#28 | 1.0kgf (Min) | |||
AWG#30 | 0.8kgf (Min) | |||
5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 0.50kgf (Max.) | |
5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. | 0.50kgf (Min.) | |
5-5 | Pin Retention Force | Apply axial push force at the speed rate of 25±3mm / minute | 0.50kgf (Min.) | |
5-6 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. | Contact Resistance 60mΩ (Max.) | |
5-7 | Vibration |
Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) |
Appearance No Damage. Contact Resistance 60mΩ (Max.) Discontinuity 1 μsec.(Max.) |
|
5-8 | Physical Shock | 490m/s²{50G},3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) |
Environmental Performance And Others
Test Description | Procedure | Requirement | |
6-1 | Temperature Rise | Carrying rated current load.(Based upon UL 498) | 30℃(Max.) |
6-2 | Heat Resistance | 85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A) |
Appearance No Damage. Contact Resistance 60mΩ (Max.) |
6-3 | Cold Resistance | -25±3℃,96 hours (Based upon JIS C0020) | |
6-4 | Humidity |
Temperature: 40±2℃ Relative Humidity : 90~95% Duration: 96 hours (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B) |
Appearance No Damage. Contact Resistance 60mΩ (Max.) Insulation Resistance 50MΩ (Min.) Dielectric Withstanding Voltage Must meet 4-3 |
6-5 | Temperature Cycling |
5 cycles of: a) -55℃ 30 minutes b) +85℃ 30 minutes (Based upon JIS C0025) |
Appearance No Damage. Contact Resistance 60mΩ (Max.) |
6-6 | Salt Spray | Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101C Cond. B) | |
6-7 | SO2 Gas |
24 hours exposure to 50±5ppm. SO2 gas at 40±2℃. |
|
6-8 | NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
6-9 | Solderability |
Soldering Time: 5±0.5 sec. Solder Temperature: 245±5℃ |
Solder Wetting 95% of immersed area must show no voids, pin holes |
6-10 |
Resistance to Soldering Heat (DIP) |
Solder pot method Soldering time: 10±0.5 sec. Solder Temperature: 260±5℃ Solder iron method Soldering Time: 5±0.5 sec. Solder Temperature: 370℃ ~ 400℃ |
Appearance No Damage. |
6-11 | Resistance to Soldering Heat (SMT) |
When reflowing Refer to paragraph 8 Solder iron method Soldering Time: 5±0.5 sec. Solder Temperature: 370℃ ~ 400℃ |
Appearance No Damage. |
3, Part's Application
This product are widely used in household appliance, computer, communication device. Because we can controll NPL ratio under 1.0%, so our parts are trusted by famouse and international company like TPV, LeTV, Emerson, Amphenol Corporation, Skyworth, LuXshare, BYD etc. And the all products are certificated by REACH, UL, RoHS. Some parts are halogen free which is friendly to environment.
1.5mm Pitch Battery Connectors with Tin-plated terminals 6 Poles Crimp Wire to Board Connector
Pitch 2.00mm Phosphor Brone / Tin-plated battery terminal connector
1.50mm Pitch Single Row 6 Pin Crimp Connector Battery Connectors for AWG24# To 30# wire harnesses
2.54mm Pitch Battery Connecor with Lock Bump Double Row Male Header Crimp Connectors
2.50mm Pitch Plug housing(for socket contact), SMR Connector Wire to Wire Connectors
2.00mm Pitch Wire To Wire Connector Crimp Receptacle Housing For Molex 51005 / 51006
Dual Row Wire To Wire Connectors Low-Halogen Molex 43025 Micro-Fit 3.0 Receptacle Housing
4.2mm Pitch Mini-Fit Plug Housing, Dual Row Wire to Wire Connector with Panel Mounting Ears
single row housing wire to board connector 1.00mm pitch 04 to 10 Pin with lock for Laptop
wire to board connector with B type lock 1.0mm pitch wire housing white color connector
2pin To 16pin Wire To Board Connectors Pitch 2.50mm Single Row With Lock Housing
Dual Row 1.00mm Pitch Wire To Board Connectors A1003H Wire Housing With Lock